


















| Name | D-Link Fast Ethernet Media Converter |
| Category | Electrical Trade Tools & Testers |
| Ethernet Standards | IEEE802.3, 10/100/1000BASE-TX and 1000BASE-FX |
| Data transmission | Low-delay time pure data transmission with full/half-duplex flow control |
| RJ45 Port | For twisted pair |
| NIC Transmission Rate | 10/100/1000 Mbit/s |
| Title | D-Link 10/100 Base-TX to 100 Base-FX Multimode SC Media Converter |
| Quantity | 30 pcs |
| Auto-Adaptation | Rate and full/half-duplex mode supported at RJ45 port |
| Cable Selection | Auto MDI/MDIX supported without cable selection |
| Feature | Value |
| NIC Transmission Mode | 10/100/1000 M |
| Optical Port Data Rate | 1000 Mbit/s |
| Power supply | External and built-in DC power |
| LED Indicators | 6 LEDs for status indication |
| Optical Port | Multimode duplex SC optical port |
| Data Buffer RAM | 128K |
| Operating Temp | 0-55°C |
| Weight | 134 g |
| Dimensions | 70.5x93.5x26 mm |
| MTBF | 482,583 hours |
| Company | D-Link |
The D-Link DMC-F15SC Fast Ethernet Media Converter bridges copper Ethernet and fiber optic cabling. Under standard conditions, it converts 10/100Base-TX signals to 100Base-FX for transmission over single-mode fiber. This unit extends network reach up to 15 km using a 1310 nm wavelength. Compared to the DMC-F02SC, this version increases transmission distance from 2 km to 15 km and switches from multi-mode to single-mode fiber support.
This media converter transmits data up to 15 km over single-mode fiber. It maintains a stable 10/100 Mbps connection across the entire distance.
It operates exclusively on single-mode fiber using an SC connector. The internal transceiver utilizes a 1310 nm wavelength for signal propagation.
Report incorrect information