Ingco Water Pump 370W - VPM37028

With a 370W motor, the Ingco VPM3708 Peripheral Water Pump moves 35 liters of water per minute. A 35-meter maximum head pushes water to rooftop tanks in three to four-story residential buildings. Standard 1"x1" pipe diameters allow direct integration into existing household plumbing systems.

Key Features

1. Copper Wire Motor: 370W input power with high thermal conductivity. It prevents internal coil meltdowns during long runtimes in heavy humidity.
2. Brass Impeller: Corrosion-resistant metal alloy internal construction. It stops the pump from seizing after sitting idle during frequent load shedding.
3. 8m Suction Head: Maximum lift depth for underground reservoirs. Pulls water from deep domestic tanks without requiring a separate submersible unit.
4. 35L/min Flow Rate: Maximum output capacity at zero head height. Fills a standard 1000-liter tank in approximately 30 minutes under optimal conditions.
5. 6 Months Warranty: Manufacturer coverage for specific factory defects. Provides a repair or replacement window if the motor fails within 180 days.

Frequently Asked Questions

What is the starting wattage of Ingco 370W pump?

This 0.5HP motor typically requires 1000W to 1200W of surge power during the initial startup phase. You’ll need a generator or IPS capable of handling this temporary peak load.

Can Ingco 370W pump be used with a pressure tank?

The VPM3708 functions as a water booster when connected to an external pressure switch and tank. Its 35m head rating provides enough vertical force for consistent tap pressure in multi-story homes.