Hotline: 16297 (9 AM to 8 PM) 
Hello, Sign in 
Cart 
ADNOC Brake Fluid DOT-3 transmits hydraulic force within disc and drum systems. With a 245°C dry boiling point, this glycol ether fluid resists vapor lock during friction. SAE J-1703 standards govern the chemical formula to maintain pedal firmness amidst BD humidity.
Key Features
- 245°C Dry Boiling Point: Thermal resistance keeps the fluid liquid under extreme heat. Stops vapor lock during repeated hard braking.
- Metal Corrosion Inhibitors: pH 10.0 chemical balance protects internal master cylinder components. Additives block oxidation inside the hydraulic lines.
- Seal Compatibility: Non-reactive formula maintains integrity of natural and synthetic rubber seals. Blocks fluid leaks from seal swelling or shrinkage.
- ABS Compatibility: 2.06 mm2/s viscosity at 100°C maintains flow in complex valves. Supports rapid pressure cycles in both ABS and non-ABS units.
Frequently Asked Questions
Can I use DOT 3 brake fluid in my car?
Check the master cylinder reservoir cap for a DOT 3 specification. This glycol ether fluid matches systems requiring SAE J-1703 standards.
How often should I change brake fluid?
Flush the system every 2 years to remove accumulated moisture. The 140°C wet boiling point defines the safety limit after water absorption.
