Hotline: 16297 (9.00 AM to 11.00 PM) 
Hello, Sign in 
Cart 
Under typical residential pressure, the RO Water 10 Inch Clear Filter Housing manages up to 125 PSI. With a 1/4 inch port configuration, it fits standard reverse osmosis setups and sediment filters. The transparent polypropylene construction allows immediate inspection of internal dirt levels through the housing wall.
Key Features
- Visual Monitoring: Clear polypropylene body shows internal dirt accumulation without manual disassembly. You see exactly when to swap the sediment filter.
- Dual O-Ring Protection: Two rubber seals secure the connection between the head and sump. This configuration stops water leaks under high pressure.
- Standard 1/4 Inch Ports: Threaded inlets accept 1/4 inch elbow fittings for standard RO tube connections. It integrates with most 10-inch water purifier accessories.
- Heat Resistance: Polypropylene material maintains structural integrity between 4°C and 52°C. The housing resists deformation during high-temperature water flow.
Frequently Asked Questions
How to install RO filter housing?
Screw the elbow fittings into the 1/4 inch NPT ports using Teflon tape for a tight seal. Tighten the clear sump onto the O-rings by hand to prevent thread damage.
When to replace RO filter housing?
Replace the housing every 2 to 3 years to avoid structural failure from pressure fatigue. The clear walls show if heavy road dust has saturated the internal filter.
