Hotline: 16297 (9 AM to 8 PM) 
Hello, Sign in 
Cart 
The Edifier X3S runs on the Qualcomm QCC3040 chipset with aptX audio decoding. A 6mm dynamic driver produces sound across a 20Hz-20kHz frequency range at 16Ω impedance. With Bluetooth 5.2, it replaces the older 5.0 standard and switches the Micro-USB port to USB Type-C. Total playback increases from 24 to 28 hours compared to the original Edifier X3.
Key Features
- Qualcomm aptX Audio: 16bit/44.1kHz audio decoding via the QCC3040 chipset. High-resolution sound remains stable during playback.
- Low-Latency Game Mode: Reduced delay under 80ms for synchronized audio and video. Sound matches on-screen actions without lag.
- 28-Hour Playback: 8 hours per charge plus 20 hours from the case. It lasts through heavy sweat and humidity.
- cVc 8.0 Noise Cancellation: Dual-mic arrays filter environmental sounds during voice calls. Background noise stays low in crowded areas.
- 12 Months Warranty: Official manufacturer coverage for hardware defects. Verified protection against internal component failure.
- IP55 Dust and Water Resistance: Protection against dust ingress and low-pressure water jets. It survives rain but fails submerged.
Frequently Asked Questions
Is Edifier X3S good for gaming?
The low-latency game mode reduces audio delay to approximately 80ms. This prevents the sound lag found in standard Bluetooth earbuds.
How to reset Edifier X3S earbuds?
Place both earbuds in the case and long-press the touch buttons for 8 seconds. The LED flashes to indicate the pairing history is cleared.
