With a 3.96mm mini 4-pin header, the Non-Brand 4 Pin Mini to SATA HDD Power Cable links a DVR motherboard to a standard drive. Under the chassis, this 4 pin mini power to 15 pin SATA adapter connects the small power port. Use this for powering internal surveillance storage during continuous recording.
Key Features
- 4-Pin Mini Interface: 3.96mm pitch connector fits standard Hikvision DVR SATA power cable headers. Links motherboard power to the drive.
- 15-Pin SATA Output: Standard female connector for 3.5-inch and 2.5-inch SATA hard disks. Connects any standard surveillance storage drive.
- Dual Voltage Support: Internal copper wiring carries 5V and 12V power signals. Maintains drive stability during load shedding restarts.
- Color-Coded PVC: Yellow, Black, and Red wires identify the specific voltage rails. Prevents incorrect connections during drive installation.
- 0.5m Cable Span: 50cm length routes power across the internal DVR metal chassis. Fits NVR hard disk power cable housings.
Frequently Asked Questions
How to connect SATA HDD to Hikvision DVR?
Plug the 4-pin mini connector into the motherboard's power header. Connect the 15-pin SATA end to the hard drive.
What is the 4 pin power connector on DVR motherboard?
This 3.96mm pitch header supplies power directly to internal storage drives. It supports both 5V and 12V outputs for SATA hardware.
