Hotline: 16297 (9.00 AM to 11.00 PM) 
Hello, Sign in 
Cart 
With three operating modes, the Tolsen 87215 drives screws and drills into masonry using a 20V platform. A 13mm metal keyless chuck grips bits tight under 55Nm of torque. Compared to the 87212, this model increases torque by 20Nm and expands the chuck capacity from 10mm to 13mm. It also introduces a 27200 bpm impact function for concrete work.
Key Features
- 3-in-1 Operating Modes: Screwdriving, drilling, and impact drilling settings. Switch between furniture assembly and boring into brick.
- 13mm Metal Keyless Chuck: All-metal construction for heavy-duty bit retention. Stops bits from loosening while boring through 13mm steel plates.
- 55Nm Max Torque: 21+1+1 clutch settings with a 20V motor. Adjusts power to prevent stripping screw heads in soft materials.
- Dual Speed Gearbox: 0-450 and 0-1700 rpm no-load speeds. Low gear provides high torque for driving thick bolts.
- Impact Rate: 7200 to 27200 bpm striking frequency. Pulverizes masonry efficiently despite heavy dust on local construction sites.
- 15-Piece Accessory Set: Includes bits and a BMC carry case. Provides immediate utility for basic home repair tasks.
Frequently Asked Questions
Is Tolsen 87215 good for concrete?
The impact mode strikes at 27200 bpm for drilling 13mm holes in masonry. It handles household brick but fails against thick reinforced slabs.
How long does the battery last?
One 2.0Ah battery supports approximately 40 minutes of continuous wood drilling. High-torque steel work or masonry impact modes drain the cell faster.
