Hotline: 16297 (9 AM to 8 PM) 
Hello, Sign in 
Cart 
The Tolsen 79505 Industrial Hammer Drill 750W bores through masonry and metal using a 13mm keyed chuck. A mechanical switch toggles between standard rotation and high-frequency impact. Upgraded from the 500W 79504, this version provides 750W of power for higher torque. Impact frequency increases to 48000 bpm to accelerate penetration in dense concrete.
Key Features
- Variable Speed Trigger: 0-3000 RPM range managed by an integrated pre-selection wheel. Prevents bit overheat by matching rotation to material hardness.
- Dual-Mode Selector: Dedicated toggle for standard drilling or hammer action. Drill through timber or switch to hammer for hard brick.
- Industrial FX Build: High-grade internal components with GS approval for heavy use. Resists motor burnout during prolonged drilling in humid BD conditions.
- Lock-on Button: Side-mounted trigger lock for constant motor engagement. Eliminates finger strain during deep-hole drilling in thick slabs.
- Forward/Reverse Rotation: Directional switch located above the trigger assembly. Backs out stuck bits from masonry holes without snapping the steel.
Frequently Asked Questions
Is Tolsen 79505 suitable for concrete?
Yes, the hammer function produces 48000 impacts per minute for masonry work. Use carbide-tipped bits to penetrate brick or cured concrete effectively.
How to change bits in Tolsen 79505?
Insert the included chuck key into the 13mm keyed head to open the jaws. Tighten all three holes to prevent bit slippage during high-torque tasks.
