The Tolsen 79510 Industrial Rotary Hammer Drill draws 800W to penetrate concrete, wood, and steel surfaces. With a 2.8J impact energy rating, it handles structural drilling and light demolition tasks. This updated FX Series model increases power from the previous 650W version and replaces the keyed chuck with an SDS-plus system.
Key Features
- 3-Function Mode: Drill, hammer, and chisel settings via a manual selector dial. Handles masonry penetration and demolition without tool swaps.
- SDS-plus Chuck: Tool-free bit changes supporting up to 26mm concrete bits. Prevents bit slippage when drilling through reinforced slabs.
- 800W FX Motor: High-torque output reaching a maximum rate of 5500 bpm. Resists overheating during long shifts on dusty BD sites.
- VDE Approved Cable: 2-meter insulated cord with CE/GS safety approval. Protects against electrical shorts in high-humidity work zones.
Frequently Asked Questions
Is Tolsen 79510 good for concrete?
It penetrates concrete up to a 26mm diameter. The 2.8J impact energy drives the bit through stone without stalling.
What is the impact energy of Tolsen 79510?
It produces 2.8 Joules of impact energy at 5500 bpm. This force drives chiseling and heavy masonry drilling.
